Description
The Floker preparation is intended for the clarification of swimming pool water and for the coagulation of pollutants in the water. Thanks to the use of this agent, the water becomes transparent and shiny. The agent should be used when the water in the pool is cloudy at the correct pH values and the content of the disinfectant (chlorine, active oxygen). The preparation creates "flakes" of impurities in the pH range from 5,0 to 9,0. HOW TO USE: Check the pH of the water - it should be 7,0 - 7,4 - the preparation works most effectively then. If the value is different, use a pH corrector (pH AQUA PLUS or pH AQUA MINUS). Use the preparation in the amount of 1,0 - 3,0 ml / m3 for several days, until the effect of "pure water" is obtained. The required dose should be mixed in a clean vessel with water and poured into the pool. The larger flakes will fall to the bottom (they can be vacuumed up), the smaller ones will stop in the filtering device. The preparation can be used in automatic dosing stations. It is recommended to use the BRINK product for washing the pool. capacity 1,0L highly-effective preparation for coagulation of pollutants in the swimming pool water supports the operation of the sand filter, catches the smallest dirt and combines into larger ones, which are then collected by the sand filter product necessary to obtain the effect of "clean water"
